کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1619482 | 1005721 | 2011 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Manufacturing of the bulk amorphous Fe61Co10Zr2+xHf3âxW2Y2B20 alloys (where x = 1, 2, 3) their microstructure, magnetic and mechanical properties
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
Rapid-solidification - انجماد سریعMagnetic measurements - اندازه گیری های مغناطیسیMechanical properties - خواص مکانیکیMicrostructure - ساختار(بافت) ذره ای و کوچکMetallic glasses - شیشه های فلزیMössbauer spectroscopy - طیف سنجی Mössbauermagnetization - مغناطشAmorphous material - مواد آمورفNanostructured material - مواد نانوساختارScanning electron microscopy - میکروسکوپ الکترونی روبشیX-ray diffraction - پراش اشعه ایکس
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
⺠This article provide information about manufacturing Fe-Co-B type bulk amorphous and partially crystallized alloys with different Hf and Zr addition, obtained by suction casting method, their structure, magnetic and mechanical properties. ⺠Alloys with same atomic composition obtained in the form of plates with 0.5 mm thickness were amorphous, in contrary to rods with 1 mm diameter, which were partially crystallized. ⺠Best soft magnetic and some mechanical properties (microhardness) were obtained for amorphous alloys - plates with highest Zr content. ⺠It was also found that crystallized ingots of all the investigated materials have greater values of wear resistance than their amorphous equivalents.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 509, Supplement 1, June 2011, Pages S155-S160
Journal: Journal of Alloys and Compounds - Volume 509, Supplement 1, June 2011, Pages S155-S160
نویسندگان
Marcin Nabialek, Marcin Dospial, Michal Szota, Jacek Olszewski, Simon Walters,