کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1622092 | 1516392 | 2009 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation of Ni–Nb-based metallic glass wires by arc-melt-type melt-extraction method
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Ni–Nb-based binary and ternary metallic glass wires with superior bending ductility and extremely high tensile strength exceeding 2 GPa were prepared by the arc-melt-type melt-extraction method. Continuous metallic glass wires without a thick oxide layer and surface roughness were obtained from Ni60Nb20M20 (M = Ti, Zr, Hf, V, Nb, and Ta) alloys. However, an amorphous phase was not obtained in Ni60Nb20M20 (M = Cr, Fe, Co, Cu, Al, Si, and Sn) alloys; further, a continuous metallic crystalline wire was formed only from the Ni–Nb–Fe alloy. In Ni–Nb based alloys, amorphous phase formation is favorable for the formation of continuous metallic wires by the arc-melt-type melt-extraction method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 485, Issues 1–2, 19 October 2009, Pages 304–312
Journal: Journal of Alloys and Compounds - Volume 485, Issues 1–2, 19 October 2009, Pages 304–312
نویسندگان
Takeshi Nagase, Masayuki Ueda, Yukichi Umakoshi,