کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1626051 | 1516443 | 2007 | 5 صفحه PDF | دانلود رایگان |

The nitrate–citrate gel exhibits auto-catalytic behavior, which can be used to synthesize nanocrystalline YIG powders. In this study, yttrium iron garnet (Y3Fe5O12) nanocrystalline powders were prepared by a sol–gel auto-combustion process. The influence of metal nitrates to citric acid molar ratio (MN/CA) of the precursor solution on the combustion behavior and crystallite size of synthesized powders was investigated by scanning electron microscopy (SEM), thermal analyses (DTA/TGA) and X-ray diffraction (XRD). The results show that with increasing MN/CA value, the combustion rate increases and the single-phase YIG forms at a higher temperature. The crystallite size of the single phase YIG prepared with different MN/CA values and calcined at 800 °C for 3 h are in the range of 38–70 nm. In addition, the crystallite size of the powders increased with increasing the calcination temperature.
Journal: Journal of Alloys and Compounds - Volume 430, Issues 1–2, 14 March 2007, Pages 339–343