کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1637531 | 1516969 | 2014 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of processing parameters on corrosion properties of dissimilar friction stir welds of aluminium and copper
ترجمه فارسی عنوان
اثرات پارامترهای پردازش بر خواص خوردگی متفاوت جوش های اصطکاک مقاوم در برابر آلومینیوم و مس
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژ آلومینیوم، فلز مس، خوردگی اصطکاک جوشکاری پارامترهای پردازش،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
The influence of friction stir welding processing parameters on dissimilar joints conducted between aluminium alloy (AA5754) and commercially pure copper (C11000) was studied. The welds were produced by varying the rotational speed from 600 to 1200 r/min and the feed rate from 50 to 300 mm/min. The resulting microstructure and the corrosion properties of the welds produced were studied. It was found that the joint interfacial regions of the welds were characterized by interlayers of aluminium and copper. The corrosion tests revealed that the corrosion resistance of the welds was improved as the rotational speed was increased. The corrosion rates of the welds compared to the base metals were improved compared with Cu and decreased slightly compared with the aluminium alloy. The lowest corrosion rate was obtained at welds produced at rotational speed of 950 r/min and feed rate of 300 mm/min which corresponds to a weld produced at a low heat input.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 24, Issue 5, May 2014, Pages 1323-1330
Journal: Transactions of Nonferrous Metals Society of China - Volume 24, Issue 5, May 2014, Pages 1323-1330
نویسندگان
Esther T. AKINLABI, Anthony ANDREWS, Stephen A. AKINLABI,