کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1647173 | 1517314 | 2012 | 4 صفحه PDF | دانلود رایگان |

The isotactic poly(1-butene)/ poly(1-butene-co-propylene) in-reactor alloy was prepared by heterogeneous titanium catalyst system. The differences of crystal phase transformation time, phase transformation rate and phase transformation time between Form I and Form II at a given transformation degree at 25 °C by fourier transform infrared spectroscopy(FT-IR) were discussed. It can be seen that the transformation from Form II to I of the alloy was significantly accelerated by the increase of propylene structure unit. With the further increase of the content of the propylene unit in the alloy, the transformation may be ignored and Form I can be formed immediately at 25 °C. The change of the spherulite of pure poly(1-butene) and alloy also be observed and discussed.
When quenched from melt, the intensity of band at 923 cm− 1 becomes stronger while the intensity of band at 905 cm− 1 gradually diminishes during aging.Figure optionsDownload as PowerPoint slide
Journal: Materials Letters - Volume 73, 15 April 2012, Pages 24–27