کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1652124 | 1007636 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evolution of the interlayer microstructure and the fracture modes of the zirconia/Cu–Ag–Ti filler/Ti active brazing joints
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Evolution of the interlayer microstructure and the fracture modes of the zirconia/Cu–Ag–Ti filler/Ti active brazing joints Evolution of the interlayer microstructure and the fracture modes of the zirconia/Cu–Ag–Ti filler/Ti active brazing joints](/preview/png/1652124.png)
چکیده انگلیسی
Zirconia (3Y-PSZ) and titanium were joined by active brazing in vacuum with the 63 Ag–35.25 Cu–1.75 Ti (wt.%) filler at 840–870 °C under different contact loads. Brazing conditions did not affect noticeably the joint mechanical strength but a remarkable change of the interlayer microstructure was found. This microstructure evolution affected the fracture behavior: ductile fracture through the Ag-rich area changed to a brittle one through the intermetallic area in the titanium–filler interface after brazing with long soaking at maximum temperature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Letters - Volume 61, Issue 2, January 2007, Pages 613–616
Journal: Materials Letters - Volume 61, Issue 2, January 2007, Pages 613–616
نویسندگان
O. Smorygo, J.S. Kim, M.D. Kim, T.G. Eom,