کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1661929 | 1517703 | 2006 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
NCD by HFCVD on a Si3N4-bioglass composite for biomechanical applications
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A biocompatible Si3N4-bioglass composite was coated with nanocrystalline diamond (NCD) by the hot filament chemical vapour deposition technique (HFCVD) using a H2/Ar/CH4 gas mixture. The advantages of the biocomposite are combined with a hard, smooth and low friction coating, making it a potential material for biotribological applications. Very low intrinsic surface roughness in the range 5 to 15 nm was determined by AFM and crystallite sizes of 1 to 30 nm were measured by TEM. The substrate temperature, Ar / H2 ratio, starting roughness and cooling rate after deposition are key factors in determining the uniformity and adhesion of the NCD film to the biocomposite. To avoid blistering and guarantee high adhesion levels, depositions must be conducted below the bioglass crystallization temperature (637 °C). The highest growth rate (1 μm hâ 1) was reached with a Ar / H2 = 0.1 ratio. Brale indentation tests with 200 N showed that flat lapped substrates give a better adhesion relatively to smoother ones pre-polished in soft cloths. Slow cooling rates after deposition (2 °C minâ 1) prevented film delamination under this applied load.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 200, Issues 22â23, 20 June 2006, Pages 6409-6413
Journal: Surface and Coatings Technology - Volume 200, Issues 22â23, 20 June 2006, Pages 6409-6413
نویسندگان
M. Amaral, E. Salgueiredo, F.J. Oliveira, A.J.S. Fernandes, F.M. Costa, R.F. Silva,