کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1663441 | 1008469 | 2005 | 6 صفحه PDF | دانلود رایگان |

Thermal barrier coatings (TBCs) were obtained using a detonation gun (D-gun) spraying technique on a Ni-base superalloy, M38G. The thermal conductivity of freestanding YSZ coatings and the thermal shock behaviors of TBCs system were studied. The results showed that the D-gun sprayed TBC had a very low thermal conductivity of 1.0–1.4 W/m K, close to that of the plasma sprayed YSZ coatings and much lower than their EB-PVD counterparts. The TBCs exhibited excellent resistance to thermal shock up to 400 cycles of 1050 °C to room temperature (forced air cooling) +200 cycles of 1100 °C to room temperature (forced water quenching). The damage evolution mode of TBC system during the thermal cycling was discussed in the light of the features of microstructural development and phase changes.
Journal: Surface and Coatings Technology - Volume 200, Issue 7, 21 December 2005, Pages 2271–2276