HF radar data quality requirements for wave measurement

HF radar wave measurements are presented focussing on theoretical limitations, and thus radar operating parameters, and quality control requirements to ensure robust measurements across a range of sea states. Data from three radar deployments, off the west coast of Norway, Celtic Sea and Liverpool Bay using two different radar systems, WERA and Pisces, and different radio frequency ranges, are used to demonstrate the wave measurement capability of HF radar and to illustrate the points made. Aspects of the measurements that require further improvements are identified. These include modifications to the underlying theory particularly in high sea states, identification and removal of ships and interference from the radar signals before wave processing and/or intelligent partitioning to remove these from the wave spectrum. The need to match the radio frequency to the expected wave peak frequency and waveheight range, with lower radio frequencies performing better at higher waveheights and lower peak frequencies and vice versa, is demonstrated. For operations across a wide range of oceanographic conditions a radar able to operate at more than one frequency is recommended for robust wave measurement. Careful quality control is needed to ensure accurate wave measurements.