Determining the weights of two types of artificial reefs required to resist wave action in different water depths and bottom slopes

The interaction between waves and artificial reefs (ARs; a hollow cube weighing 8.24 kN (0.84 t) and a water pipe weighing 1.27 kN (0.13 t)) in shallow waters was investigated with respect to variations in design weight, orientation (for cube; 45° and 90° angles, for pipe; 0°, 90°, and 180° angles to flow), depth (1–20 m), and bottom slope (10−1, 30−1, and 50−1). Physics equations and FLUENT software were used to estimate resisting and mobilising forces, and drag coefficients. Drag coefficients for the hollow cube were 0.76 and 0.85 at 45° and 90° angles to the current, respectively, and 0.97, 0.38, and 1.42 for the water pipe at 0°, 90°, and 180° angles to the current, respectively. Deepwater offshore wave conditions at six stations were transformed into shallow nearshore waters representative of the artificial reef site. Waters deeper than 12 and 16 m are safe to deploy blocks with angles of 45° and 90°, respectively. However, water pipes constructed at angles of 90° and 180° to the current were estimated as being unstable for 365 out of 720 cases at all stations (only one station was stable for all cases). Water pipes angled at 0° were found to be stable in all 360 cases. Slope had a significant effect on weight and depth. Results from this study provide an important reference for engineers performing projects aiming to increase the performance and service life of ARs.