Reduction of jack-up and crane vessel resistance and bow swamping

A large bow wave forms when blunt-shaped vessels like self-propelled jack-up crane vessels (liftboats) operate at high speeds. Above a critical speed, this bow wave spills over the bow causing swamping. To investigate this phenomena, towing tank tests of a 1/25 scale model liftboat hull were done over a speed range of 3–8 kn. The test showed above 4 kn the bow wave formed and the vessel trimmed by the bow. At speeds above 8 kn the bow wave spilled over the bow (swamping). To cancel this critical bow wave a vertical bow plate was fitted ahead of the liftboat bow. This bow plate reduced the bow wave formation and achieved a 10–15% reduction in the towing resistance. The wave cancellation bow plate can reduce the liftboat power or increase its liftboat speed and operating range.