Reducing the energy penalty of CO2 capture and compression using pinch analysis

Integration of CO2 capture and storage (CCS) into coal-fired power stations is seen as a way of significantly reducing the carbon emissions from stationary sources. A large proportion of the estimated cost of CCS is because of the additional energy expended to capture the CO2 and compress it for transport and storage, reducing the energy efficiency of the power plant. This study uses pinch analysis and heat integration to reduce the overall energy penalty and, therefore, the cost of implementing CCS for power plants where the additional heat and power for the CCS plant will be provided by the existing power plant. A combined pinch analysis and linear programming optimisation are applied to determine targets for the energy penalty of existing power plants. Two existing pulverised brown coal power plants with new CCS plants using solvent absorption are used as the basis for the study that show the energy penalty can be reduced by up to 50% by including effective heat integration. The energy penalty can be further reduced by pre-drying the coal.