کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1817640 | 1525708 | 2014 | 4 صفحه PDF | دانلود رایگان |

• Y-123 samples of 20 mm diameter and 8 mm thickness were produced at different growth temperatures.
• The trapped field results give a direct proof that the samples are single domain.
• Magnetization measurements showed a sharp superconducting transition with Tc (onset) around 93.2 K.
• The critical current density (Jc) at 77 K and 0 T was 175 kA/cm2.
We investigated the effect of growth temperature on the characteristics of YBa2Cu3Oy (Y-123) bulk superconductor prepared by seeded infiltration process. Homemade Y2BaCuO5 “Y-211” particles and liquid phase of Ba3Cu5O8 were used to produce Y-123 bulks in air such that the liquid phase infiltrates into a Y-211 block. Y-123 samples of 20 mm diameter and 8 mm thickness were produced at different growth temperatures, i.e., 990, 985, 983, 980 and 978 °C with the same holding time of 25 h. We found that single grain growth without multi-nucleation occurred at 980 °C. Further, magnetization measurements indicated a sharp superconducting transition with Tc (onset) around 93.2 K. Trapped field measurements showed that the samples are single domain, and the sample 27 mm in diameter and 5 mm in thickness showed the maximum trapped field of around 0.45 T on the sample surface at 77 K. The critical current density (Jc) at 77 K and zero field was determined to be 175 kA/cm2, which is the highest value ever reported in the literature.
Journal: Physica C: Superconductivity - Volume 504, 15 September 2014, Pages 4–7