کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1817758 | 1525711 | 2014 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Maximum permissible voltage of YBCO coated conductors Maximum permissible voltage of YBCO coated conductors](/preview/png/1817758.png)
• We examine three kinds of tapes’ maximum permissible voltage.
• We examine the relationship between quenching duration and maximum permissible voltage.
• Continuous Ic degradations under repetitive quenching where tapes reaching maximum permissible voltage.
• The relationship between maximum permissible voltage and resistance, temperature.
Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.
Journal: Physica C: Superconductivity - Volume 501, 15 June 2014, Pages 14–18