Loss measurement and analysis for the prototype generator with HTS stator and permanent magnet rotor

• A novel prototype HTS generator with HTS armature windings was developed.
• No-load loss and the iron loss at low temperature were measured.
• The total loss at low temperature is much larger than the room temperature case.
• The reason for no-load loss increment at low temperature is discussed.

A prototype HTS synchronous generator with a permanent magnet rotor and HTS armature windings was developed. The rated armature frequency is 10 Hz. The cryogenic Dewar is tightly surrounded outside the iron core. Both HTS coils and the iron core were cooled by using conduction cooling method. During the process of no-load running, the no-load loss power data were obtained through the torque measurement. The temperature evolution characteristics of the stator was measured by PT-100 temperature sensors. These results show that the no-load loss power at around 77 K are much larger than that at room temperature. The possible reason for the no-load loss increment is discussed. The ac loss power of one individual HTS coil used in this generator was also tested. Compared with the iron loss power, the ac loss power is rather small and could be neglected.