کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1819710 | 1525770 | 2007 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Design, simulation, and fabrication of a MEMs switched superconducting microstrip hairpin filter Design, simulation, and fabrication of a MEMs switched superconducting microstrip hairpin filter](/preview/png/1819710.png)
High performance high Tc superconductor based series micro electromechanical system (MEMs) switches have been utilized to switch between a bandpass hairpin filter, center frequency f0 = 2.5 GHz, and BW of 250 MHz, and a through transmission line. This was accomplished with four switches actuated in pairs, one pair at a time. When the first pair is actuated, the through transmission line is capacitively connected between the input and output ports; accordingly, the system behaves as a throughline. When the second pair of switches is actuated, the bandpass filter is coupled to the input and output ports; thus a corresponding bandpass response is obtained. The design is implemented on a YBa2Cu3O7 thin film deposited on a 15 mm × 15 mm LaAlO3 substrate by pulsed laser deposition. BaTiO3 deposited by RF magnetron sputtering is utilized as the insulation layer at the switching points of contact. The advantages and issues of this structure and its fabrication details are discussed along with simulations and experimental data.
Journal: Physica C: Superconductivity - Volume 466, Issues 1–2, 1 November 2007, Pages 101–105