کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1879361 | 1042563 | 2010 | 11 صفحه PDF | دانلود رایگان |
A novel impregnated polymeric resin was practically tested as adsorbent material for removal of some hazardous radionuclides from radioactive liquid waste. The applicability for the treatment of low-level liquid radioactive waste was investigated. The material was prepared by loading 4,4′(5′)di-t-butylbenzo 18 crown 6 (DtBB18C6) onto poly(acrylamide-acrylic acid-acrylonitril)-N, N′-methylenediacrylamide (P(AM-AA-AN)-DAM). The removal of 134Cs, 60Co, 65Zn , and (152+154)Eu onto P(AM-AA-AN)-DAM/DtBB18C6 was investigated using a batch equilibrium technique with respect to the pH, contact time, and temperature. Kinetic models are used to determine the rate of sorption and to investigate the mechanism of sorption process. Five kinetics models, pseudo-first-order, pseudo-second-order, intra-particle diffusion, homogeneous particle diffusion (HPDM), and Elovich models, were used to investigate the sorption process. The obtained results of kinetic models predicted that, pseudo-second-order is applicable; the sorption is controlled by particle diffusion mechanism and the process is chemisorption. The obtained values of thermodynamics parameters, ΔH°, ΔS°, and ΔG° indicated that the endothermic nature, increased randomness at the solid/solution interface and the spontaneous nature of the sorption processes.
Journal: Applied Radiation and Isotopes - Volume 68, Issue 2, February 2010, Pages 239–249