Decomposition of PCBs in transformer oil using an electron beam accelerator

Decomposition of PCBs in commercially used transformer oil used for more than 30 years has been carried out at normal temperature and pressure without any additives using an electron beam accelerator. The experiments were carried out in two ways: batch and continuous pilot plant with 1.5 MeV of energy, a 50 mA current, and 75 kW of power in a commercial scale accelerator.The electron beam irradiation seemed to transform large molecular weight compounds into lower ones, but the impact was considered too small on the physical properties of oil. Residual concentrations of PCBs after irradiation depend on the absorption dose of the electron beam energy, but aliphatic chloride compounds were produced at higher doses of irradiation. As the results from FT-NMR, chloride ions decomposed from the PCBs are likely to react with aliphatic hydro carbon compounds rather than existing as free radical ions in the transformer oil. Since this is a dry process, treated oil can be used as cutting oil or machine oil for heavy equipment without any additional treatments.

► We developed a novel technology of decomposing PCBs in transformer oil using an electron beam.
► Distinct feature is accomplishing at ambient temperature and pressure without any additives.
► Residual PCBs were depended on absorption dose, but aliphatic chlorides were produced at higher dose.
► Treated oil can be reused as heating oil with chlorine removal technology developed here.