Preirradiation grafting of acrylonitrile onto polypropylene monofilament for biomedical applications: I. Influence of synthesis conditions

Graft polymerization of acrylonitrile onto polypropylene (PP) monofilament was carried out by a preirradiation method using a 60Co gamma radiation source. The influence of synthesis conditions, such as preirradiation dose, reaction time, monomer concentration, reaction temperature and additives was determined. The grafting was considerably influenced by the instantaneous swelling of the monofilament in the reaction mixture during the course of the grafting process. The order of dependence of the rate of grafting on monomer concentration was found to be 1.04. The nature of the medium of the grafting and the additives had profound influence over the grafting reaction. The accelerative effects of solvent medium on the grafting were higher in methylethyl ketone (MEK) and dimethylformamide (DMF) as compared to methanol. At the same time, partial replacement of DMF with water led to acceleration in the grafting with peak maxima at 20% solvent composition. The addition of a small amount of sulfuric acid to the reaction mixture also resulted in a significant acceleration of the degree of grafting.