Effect of thermosonication on quality improvement of tomato juice

Inactivation of pectinmethylesterase (PME) and polygalacturonase (PG) is required to minimize quality loss in tomato products. Tomato juice was subjected to thermosonication (TS) (24 kHz), at amplitudes of 25, 50 and 75 μm at 60, 65 and 70 °C or heat only treatments. The TS treatment at 60 °C, 65 °C and 70 °C for 41.8, 11.7 and 4.3 min exposure, respectively reduced PME activity by 90%. The heat only treatment at 60 °C, 65 °C and 70 °C for 90.1, 23.5 and 3.5 min, respectively inactivated PME by 90%. TS treatments with 25–75 μm amplitude had no significant impact on the inactivation efficiency between 60 and 70 °C. After TS the average particle size decreased noticeably (< 30 μm) and viscosity increased 2–4 fold, compared to the heat treated or untreated juice (180 μm). These results suggest that TS at 60 and 65 °C could be useful to obtain tomato juice with a low residual PME activity and high viscosity.Industrial relevanceThe processed tomato industry is constantly in search for potential alternative processes to conventional “cold break” and “hot break” treatments that could inactivate the pectic enzymes of importance. The findings of this study would help the industry to inactivate pectinmethylesterase (PME) enzyme at a lower temperature range and also achieve a higher viscosity due to the mechanical effects of thermosonication. Low temperature treatment would enable the retention of fresh-like properties of tomato juice. Based on the findings of this study, thermosonication could be considered as a potential alternative to conventional “cold break” and “hot break” treatments of tomato juice.