کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
233740 465362 2011 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The effect of using different comminution procedures on the flotation of Platinum-Group Minerals
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
The effect of using different comminution procedures on the flotation of Platinum-Group Minerals
چکیده انگلیسی

The use of High Pressure Grinding Rollers (HPGR) has been widely reported to have major benefits in the treatment of minerals such as iron ore and diamonds. To date there have been few investigations into its use in the treatment of ores containing Platinum-Group Minerals (PGMs). HPGRs are known to reduce energy consumption and wear costs and improve the throughput in the circuit. In the present investigation the effect of the comparative use of HPGR and conventional crushing in combination with either dry or wet rod milling on the flotation of PGMs was studied using batch flotation. Previous studies of a base metal sulphide had shown that either HPGR or conventional crushing followed by dry milling produced the highest grades and recoveries (Palm et al., 2010). However in the present study it was observed that a similar treatment of Platinum-Group Minerals produced the poorest results and the highest grades and recoveries were obtained for the case of conventional crushing in combination with wet milling. The HPGR showed no advantages in terms of flotation performance and dry milling produced particularly poor flotation results.The results were investigated further using various surface characterization techniques in order to determine the reason for the decrease in grades and recoveries of platinum when using dry milling and HPGR as opposed to the case for base metal sulphides. The feed and product samples were analysed using ToF-SIMS, XPS and MLA. The paper will propose reasons to explain the different flotation behaviour of the two ore types following the various comminution processes focusing on the surface characteristics of the ores, the particle size distribution and the pulp chemistry.

Research highlights
► The effect of different comminution procedures on the flotation of PGM ores was studied.
► As opposed to BMSs the worst flotation performance with PGMs was observed with dry milling.
► ToF-SIMS, XPS and MLA were used to study the surface of particles to explain the results.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Minerals Engineering - Volume 24, Issue 8, July 2011, Pages 731–736
نویسندگان
, , , ,