Tangential velocity measurements in a conical hydrocyclone operated with a fibre suspension

The tangential velocity flow field in a conical hydrocyclone was measured using a self-cleaning pitometer. The influence of pulp fibre concentration on the tangential velocity profile was of particular interest.The measurements showed that the pulp fibres had a strong influence on the tangential velocity profile. When operating the hydrocyclone with pure water, the velocity profile showed the typical combination of free-vortex-like rotation close to the hydrocyclone wall and solid-body-like rotation in the proximity of the hydrocyclone axis. This profile changed significantly when pulp fibres were added. At a low fibre concentration (1.2 g/l), the fibres smoothened the transition between the free-vortex-like and the solid-body-like region of the velocity profile. The location of the maximum tangential velocity moved to a larger radius. At higher fibre concentration (7.5 and 11 g/l), the free-vortex-like behaviour in the outer area was virtually suppressed. Due to networking, the fibre suspension in the entire hydrocyclone behaved as a solid body.The radial acceleration profile and tangential rate-of-strain profile were determined. Based on these profiles, a hypothesis was proposed explaining the well-known observation that fractionation efficiency decreases significantly at higher fibre concentrations.