کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
234865 | 465453 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Boundary conditions for gas rate and bubble size at the pulp–froth interface in flotation equipment
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper describes the effective boundary conditions for the gas dispersion parameters of bubble size, superficial gas velocity and bubble surface area flux, in mechanical and column flotation cells. Using a number of previously derived correlations, with appropriate simplifying assumptions, and experimental data reported from plant practices, the boundary conditions were identified. Thus, it was shown that these constraints typically allow for a mean bubble diameter range of db = 1–1.5 mm and superficial gas rate of Jg = 1–2 cm/s, in order to maximize the bubble surface area flux, Sb = 50–100 s−1. Under these conditions there is no carrying capacity limitation, while keeping a distinctive pulp–froth interface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Minerals Engineering - Volume 20, Issue 6, May 2007, Pages 625–628
Journal: Minerals Engineering - Volume 20, Issue 6, May 2007, Pages 625–628
نویسندگان
J.B. Yianatos, F. Henríquez,