Experimental research on combustion dynamics of medium-scale fire whirl

The medium-scale fire whirl was extensively investigated by experimental means, in order to establish correlations of the burning rate, flame height and flame temperature of fire whirl, and to clarify the difference between fire whirls and general pool fires. Experimental observations and data confirmed that a free burning fire whirl is a highly stable burning phenomenon with large quasi-steady periods. Burning rates of fire whirls depend on pool diameter similarly to those of general pool fires; however the transition turbulent burning occurs sooner as the pool diameter increases. The lip height seems to have little effect on the burning rate of fire whirls. The correlation H∗=K·(Q˙∗·Γ∗2)m was proposed to couple the height of fire whirl to the fire release rate and ambient circulation. It correlates the data from both this work and the literature. Radial temperature profiles in the continuous region of the fire whirl were confirmed to be hump-type, implying the existence of fuel-rich inner core. The pool diameter and heat release rate do not significantly affect the radial temperature profiles in non-dimensional radial coordinates. It was found that the fire plume of fire whirl involves three distinct zones just like that of pool fire, but with different normalized ranges. Fire whirls maintain a higher ratio of continuous flame height to the overall flame height, and also higher maximum centerline excess temperature in continuous flame region, as compared to general pool fires. It was further demonstrated that the fire whirl plume at its origin behaves like a turbulent jet with moderate swirling, and then tends to become buoyancy dominated downstream, with slight swirling. With an increase in dimensionless height adjusted by the plume origin, the plume centerline excess temperature decays rapidly and approaches the theoretical value of −5/3 for free buoyancy plume.