The effect of potassium bromide and sodium carbonate on coal char combustion reactivity

The addition of halogens, particularly iodine, to the gas during coal char oxidation has been used in previous studies to quench gas-phase chemistry, thereby allowing one to separate the effects of homogeneous and heterogeneous reactions. Halogen addition suppresses the gas-phase radicals to near-equilibrium levels. A similar effect can be expected from other compounds with high efficiency as fire suppressants, such as alkali metals. The effectiveness of the use of additives in distinguishing homogeneous and heterogeneous reactions during char oxidation relies on the assumption that radicals are suppressed while heterogeneous reactions occurring on the char surface are not affected. The present work tests this assumption for potassium bromide (KBr) and sodium carbonate (Na2CO3) reacting with a pulverized eastern bituminous coal char during oxidation. An increase in CO and a slight reduction in particle temperature were observed with the addition of KBr, consistent with known effects of halogens on gas-phase chemistry. An increase in particle size was also observed with the KBr addition. This observation and the results of model calculations suggest that there is significant incorporation of liquid KBr on the char surface under the conditions examined. With Na2CO3 addition, the particle temperature did not change, the particle size showed a slight decrease, and CO production increased. Although the mechanisms for Na interaction with radicals at combustion conditions are not well established, char oxidation modeling suggests that a decrease in OH concentration in the particle boundary layer is the cause for the observed increase in CO production. It is concluded that Na2CO3 has clear advantages over KBr for inhibiting gas-phase chemistry without affecting char oxidation for the conditions investigated here.