Effects of conservation method on fatty acid composition of silage

This experiment was conducted to investigate effects of wilting and additives on the fatty acid (FA) composition of grass silage. The crop used was timothy (Phelum pratense L., cv. Grindstad), and the additives were Proens™ (formic acid and propionic acid, 60–66 g/100 g and 25–30 g/100 g, respectively), the bacterial inoculant Siloferm® Plus (Pediococcus acidilactici and Lactobacillus plantarum) and water (control). The wilted material reached a dry matter (DM) content of 336 g/kg at the first cut and 350 g/kg at the second cut. Neither wilting nor the additives had any major effect on the FA proportions, with the only differences in the concentrations of C16:0 and C18:3. Silage treated with bacterial inoculant contained a higher proportion of C16:0 (P<0.05) than silage treated with acid, and a lower (P<0.05) concentration of C18:3 than silage treated with either of the other two additives. In the silages, there were lower (P<0.05) proportions of C16:0, C18:0, C18:1 and C18:3, and higher (P<0.05) proportions of C16:1, C18:2 and other identified FAs, than in the fresh material. A wilting process shorter than 24 h, to a DM content of 330–350 g/kg, did not have any effect on the proportions of FAs in P. pratense L., cv. Grindstad. Since the different additives and wilting strategies tested in this study did not affect the proportions of FAs in silage to a major extent, the results indicate that such a process offers a robust means to avoid losses of FAs that can occur during wilting, while retaining the positive effects of wilting, such as reduced losses of nutrients through effluents.