کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
257559 | 503593 | 2014 | 8 صفحه PDF | دانلود رایگان |
• Rubberized pervious concretes were produced.
• Fine and coarse aggregates were replaced with crump rubber and tire chips.
• Permeability significantly reduced with tire rubbers.
• Effect of tire rubbers on mechanical properties was negative.
• Tire rubber enhanced fracture energy of the concretes.
Objective of the work: To study the properties of rubberized plain pervious concrete in terms of the mechanical properties and the permeability.Materials and methods: Three types of rubber were used in the production of rubberized plain pervious concrete mixtures which obtained by partially replacing the aggregate with rubber. One water-cement (w/c) ratio, one moist curing period, and four designated rubber contents by total aggregate volume were considered as experimental parameters. The results compared with non-rubberized pervious concrete (control) mixture.Results: The use of rubber significantly aggravated the pervious concrete mechanical properties and its permeability but in different degrees according to the rate and type of rubber used. However, replacement of natural aggregate with rubber particles resulted in a significant increase of toughness and ductility of concrete as well as better damping capacity.
Journal: Construction and Building Materials - Volume 63, 30 July 2014, Pages 206–213