Nondestructive evaluation of concrete strength: An historical review and a new perspective by combining NDT methods

This paper analyzes why and how nondestructive testing (NDT) measurements can be used in order to assess on site strength of concrete. It is based on (a) an in-depth critical review of existing models, (b) an analysis of experimental data gathered by many authors in laboratory studies as well as on site, (c) the development and analysis of synthetic simulations designed in order to reproduce the main patterns exhibited with real data while better controlling influencing parameters. The key factors influencing the quality of strength estimate are identified. Two NDT techniques (UPV and rebound) are prioritized and many empirical strength-NDT models are analyzed. It is shown that the measurement error has a much larger influence on the quality of estimate than the model error. The key issue of calibration is addressed and a proposal is made in the case of the SonReb combined approach. It is based on the use of a prior double power law model, with only one parameter to identify. The analysis of real datasets from laboratory studies and from real size buildings show that one can reach a root mean square error (RMSE) on strength of about 4 MPa. Synthetic simulations are developed in order to better understand the role played by the strength range and the measurement error. They show that the number of calibration cores can be significantly reduced without deteriorating the quality of assessment. It is also shown that the optimal calibration approach depends on the number of cores.

► State of the art on NDT for concrete strength.
► In-depth literature review.
► How rebound and ultrasonic wave velocity can be combined.