Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions

In the past decade finite element simulation has become a very useful methodological tool in the different science fields. This article offers a specific application of this powerful mechanism used for analyzing the mechanical behaviour of constructive elements in the design phase, prior to the laboratory tests’ stage. The aim of applying this simulation is to minimize the high cost the real scale fabrication of these elements entails.This research focuses on the analysis by finite element simulations (FES) of several construction elements used as interior partitions and made of plaster lightened with cork. The results of the study will allow us to determine the most suitable thickness values and proportions to ensure that the requirements stated by the standards and norms for light partitions are fulfilled. These parameters will later be useful for the final laboratory tests.Two simulation groups have been developed using the ANSYS application: firstly, a partition leaf of 200 × 260 cm is studied exposing it to a superficial load and to an eccentric load following the EUAtc common directives for the technical appreciation of light panels, 1973). Second, the behaviour of a panel with a through opening is tested with the simulation regarding the different hypothesis of the structure deformation supporting and surrounding it.Finally, it is proved that the element of thickness 7 cm and proportions stated at the beginning ensure a good performance regarding strain without producing any visible fissures, and therefore are suitable for a further laboratory test on real models.