Design and concept validation of the new solid tungsten divertor for ASDEX Upgrade

Div-III, a divertor with solid tungsten target tiles for ASDEX Upgrade is designed and tested and will be installed in 2013. It is a further step in exploring tungsten as material for plasma facing components. It avoids the restrictions of tungsten coatings on graphite and realizes an operation range up to 50 MJ energy removing capability in the outer divertor. In addition, it allows physics investigation such as erosion and deuterium retention as well as effects of castellation and target tilting. The design of the target itself and the attachment was optimized with FE-analysis and was intensively high heat tested up to a double overload. Cyclic tests reveal that the target and the attachment can be operated with the design load of 50 MJ without any damage. Even a twofold overload results in local recrystallization and minor cracks but the targets did not fail during operation. The redesign of the divertor structure was used to increase the conductance between the cryo-pump and the divertor region. The impact of the changed pumping efficiency was investigated with SOLPS/Eirene modeling. The modeling results are an indication for an easier access to lower SOL densities as expected for a higher pumping efficiency in the main chamber.