Development of the IFMIF Tritium Release Test Module in the EVEDA phase

This paper presents the engineering design of the IFMIF (International Fusion Materials Irradiation Facility) Tritium Release Test Module (TRTM). The objectives of the TRTM are: (i) in-situ measurements of the tritium released from lithium ceramics and beryllium pebble beds during irradiation, (ii) studying the chemical compatibility between lithium ceramics and structural materials under irradiation, and (iii) performing post irradiation examinations for the irradiated materials. The TRTM has eight rigs which are arranged in two rows (2 × 4) perpendicular to the beam axis and enclosed by a structural container. Each rig includes one capsule that contains lithium ceramic or beryllium pebbles for irradiation. Neutrons reflectors are implemented at different locations to reflect the scattered neutrons back to the active region aiming to improve the tritium production. The TRTM is required to provide irradiation temperature range of 400–900 °C for the capsules filled with lithium ceramics and 300–700 °C for the ones packed with beryllium. The engineering design of the TRTM components such as container, rigs, capsules, pebble beds, neutrons reflectors, and purge gas and coolant tubes are presented. In addition a test matrix for the irradiation campaign is proposed.