Comparing potentials for gas outburst in a Chinese anthracite and an Australian bituminous coal mine

Gas outbursts in underground mining occur under conditions of high gas desorption rate and gas content, combined with high stress regime, low coal strength and high Young’s modulus. This combination of gas and stress factors occurs more often in deep mining. Hence, as the depth of mining increases, the potential for outburst increases. This study proposes a conceptual model to evaluate outburst potential in terms of an outburst indicator. The model was used to evaluate the potential for gas outburst in two mines, by comparing numerical simulations of gas flow behavior under typical stress regimes in an Australian gassy mine extracting a medium-volatile bituminous coal, and a Chinese gassy coal mine in Qinshui Basin (Shanxi province) extracting anthracite coal. We coupled the stress simulation program (FLAC3D) with the gas simulation program (SIMED II) to compute the stress and gas pressure and gas content distribution following development of a roadway into the targeted coal seams. The data from gas content and stress distribution were then used to quantify the intensity of energy release in the event of an outburst.