Stress intensity factors for an edge interface crack in a bonded semi-infinite plate for arbitrary material combination

Although a lot of interface crack problems were previously treated, few solutions are available under arbitrary crack lengths and material combinations. In this paper the stress intensity factors of an edge interface crack in a bonded strip are considered under tension with varying the crack length and material combinations systematically. Then, the limiting solutions are provided for an edge interface crack in a bonded semi-infinite plate under arbitrary material combinations. In order to calculate the stress intensity factors accurately, exact solutions in an infinite bonded plate are also considered to produce proportional singular stress fields in the analysis of FEM by superposing specific tensile and shear stresses at infinity. The details of this new numerical solution are described with clarifying the effect of the element size on the stress intensity factor. It is found that for the edge interface crack the normalized stress intensity factors are not always finite depending upon Dunders’ parameters. This behavior can be explained from the condition of the singular stress at the end of bonded strip. Convenient formulas are also given by fitting the computed results.