Numerical prediction and mitigation of out-of-plane welding distortion in ship panel structure by elastic FE analysis

• Large welded structure, a car deck panel, is examined by elastic FE analysis.
• Different kinds of out-of-plane welding distortion are predicted and observed.
• Welding induced buckling is investigated and its behavior is represented.
• Several possible heating condition for straightening is considered and proposed.

As an application to predict and mitigate the out-of-plane welding distortion by elastic FE analysis based on the inherent deformation theory, a panel structure of a pure car carrier ship is considered. The inherent deformations of different types of welded joints included in this ship panel structure are evaluated beforehand using thermal elastic plastic FE analysis. Applying idealized boundary condition to focus on the local deformation, elastic FE analysis shows that the considered ship panel structure will buckle near the edge and only bending distortion is dominant in the internal region. In order to mitigate out-of-plane welding distortion such as buckling and bending, straightening using line heating is employed. In the internal region, only inherent bending with the same magnitude as welding induced inherent bending is applied on the opposite side of welded joints (fast moving torch). On the other hand, only in-plane inherent strain produced by line heating is introduced to the edge region to correct buckling distortion (slow moving torch). The magnitude of out-of-plane welding distortion in this ship panel structure can be minimized to an accepted level.