Diffusion tensor imaging of articular cartilage as a measure of tissue microstructure

SummaryObjectiveTo use diffusion tensor MR micro-imaging to observe differences in magnitude and anisotropy of water diffusion between ‘healthy’ cartilage and cartilage enzymatically degraded to simulate arthritic damage.MethodsDiffusion tensor images (156 × 156 μm in-plane resolution, 2 mm slice thickness) of bovine cartilage were obtained at either 4.7 or 7.0 T using pulsed field gradient spin echo sequences. The parameters determined were: maximum and mean diffusivity, direction of the maximum diffusion eigenvector with respect to the normal to the articular surface and fractional anisotropy (FA) of diffusion.ResultsBoth maximum and mean diffusion eigenvalues were found to decrease, respectively, from ∼1.95 × 10−9 and 1.80 × 10−9 m2 s−1 at the articular surface to ∼1.08 × 10−9 and 0.79 × 10−9 m2 s−1 in the deep zone. A systematic change was observed in the direction of the eigenvector corresponding to maximum diffusivity, reflecting the expected change in orientation of the collagen macrofibrillar bundles. Degradation with trypsin to remove proteoglycans resulted in a 10–15% increase in apparent diffusion coefficient of water in the cartilage, with no apparent change in FA.ConclusionsThese methods have the potential to be used to probe local changes in tissue microstructure and the hydrodynamic status of cartilage during development of osteoarthritis.