Evaluation of ACQ-D treated Chinese fir and Mongolian Scots pine with different post-treatments after 20 months of exposure

The field test of alkaline copper quat-type D (ACQ-D) treated Chinese fir (Cunninghamia lanceolata Hook.) and Mongolian Scots pine (Pinus sylvestris Linn. var. mongolica Litv.) stakes after different post-treatments was performed in two test plots (Chengdu and Guangzhou, China). The ACQ-D treatments used two concentration levels (0.5 and 1.1%) and four different post-treatments: air drying for 1 month (AD), conditioning at 70 °C and 80% relative humidity for 24 h (HC), oven drying at 110 °C for 24 h (DO) and boiling in water for 15 h (HW). The decay and termite ratings of the stakes after 6 and 20 months of exposure were recorded according to the method described in AWPA standard E07-07. The copper retention and compression strength parallel to grain before and after exposure were also compared. The results showed that Chinese fir had slightly better natural durability than Mongolian Scots pine but the untreated sapwood stakes for both wood species were mostly destroyed after 20 months exposure. After ACQ-D treatment, the sapwood of both wood species showed much better biological performance. Among the four post-treatments, HC exhibited the best performance by showing excellent biological resistance, less copper depletion and a slight reduction in compression strength after 20 months outdoor exposure. While the performance of the other post-treated stakes were impaired heavily in some cases in terms of wood species, test plots and the concentration levels of ACQ-D solutions. Furthermore, the study confirms that ACQ-D treated plantation-grown Chinese fir could be used for outdoor above ground and ground-contact applications.