Polyurethane foam (PUF) disks passive air samplers: Wind effect on sampling rates

Different passive sampler housings were evaluated for their wind dampening ability and how this might translate to variability in sampler uptake rates. Polyurethane foam (PUF) disk samplers were used as the sampling medium and were exposed to a PCB-contaminated atmosphere in a wind tunnel. The effect of outside wind speed on PUF disk sampling rates was evaluated by exposing polyurethane foam (PUF) disks to a PCB-contaminated air stream in a wind tunnel over air velocities in the range 0 to 1.75 m s−1. PUF disk sampling rates increased gradually over the range 0–0.9 m s−1 at ∼4.5–14.6 m3 d−1 and then increased sharply to ∼42 m3 d−1 at ∼1.75 m s−1 (sum of PCBs). The results indicate that for most field deployments the conventional ‘flying saucer’ housing adequately dampens the wind effect and will yield approximately time-weighted air concentrations.