کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4435451 1620166 2015 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fish canning wastewater treatment by activated sludge: Application of factorial design optimization: Biological treatment by activated sludge of fish canning wastewater
ترجمه فارسی عنوان
تصفیه فاضلاب های کنسرو ماهی با استفاده از لجن فعال: استفاده از بهینه سازی طراحی فاکتوریل: درمان بیولوژیکی با لجن فعال فاضلاب کنسرو ماهی
کلمات کلیدی
فاضلاب کنسرو ماهی، لجن فعال طراحی فاکتور، بهینه سازی، تصفیه فاضلاب
موضوعات مرتبط
علوم زیستی و بیوفناوری علوم کشاورزی و بیولوژیک علوم آبزیان
چکیده انگلیسی


• Fish canning wastewater treatment optimization by activated sludge using RSM.
• The best treatment conditions were HRT of 6.4 h and initial DOC of 406.2 mg/L.
• HRT was the factor that most affected the DOC removal of the effluent.
• The maximum predicted DOC removal from fish canning wastewater was 88.0%.
• Activated sludge was effective for fish canning wastewaters treatment.

The optimization of hydraulic retention time (HRT) and initial organic matter concentration for dissolved organic carbon (DOC) abatement of wastewater from a fish canning industry of northern Portugal by activated sludge was investigated using response surface methodology (RSM). The two parameters were chosen since it was found that the treatment efficiency is mainly influenced by them. The experimental data on DOC removal were fitted into a quadratic polynomial model using factorial design and RSM. The optimum process conditions were determined by analyzing the response surface of a three-dimensional plot and by solving the regression model equation. The obtained results showed a HRT of 6.4 h and an initial DOC of 406.2 mg/L as the best treatment conditions. Under these conditions, the maximum predicted DOC removal was 88.0%, confirming the feasibility and the reliability of fish canning wastewater treatment by activated sludge for organic content removal.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Water Resources and Industry - Volume 10, June 2015, Pages 29–38
نویسندگان
, , , , , ,