Numerical analysis of diffusion around a suspended expressway by a multi-scale CFD model

The diffusion of NOx around Ikegami–Shinmachi crossroads, which are among the most polluted roadside areas in Japan, was analyzed with a CFD model. This is a suspended four-lane express road with a six-lane ground-level road under the expressway and another four-lane ground-level road intersecting the two roads. Three types of boundary conditions for the CFD model were tested. In the first case, the boundary conditions were given with the results from the mesoscale meteorological model; in other words, the model was multi-scale. In the second case, the boundary conditions were given with the local one-point observation. In the third case, the conditions for the wind were given with the observation, and those for the turbulence were given with the mesoscale numerical model. All of the calculations indicated high concentrations in the morning and low ones in the afternoon, but they did not indicate high concentrations in the evening. The reasons for such time variations of NOx concentrations were investigated from the viewpoints of the wind direction, velocity, and boundary layer height. The results suggested that the extremely high concentration was generated by local sources and advection from the large source area of Tokyo. On the whole, the calculation with the boundary condition with the mesoscale model appears to be better than the other calculations.