CH4 emission and conversion from A2O and SBR processes in full-scale wastewater treatment plants

Wastewater treatment systems are important anthropogenic sources of CH4 emission. A full-scale experiment was carried out to monitor the CH4 emission from anoxic/anaerobic/oxic process (A2O) and sequencing batch reactor (SBR) wastewater treatment plants (WWTPs) for one year from May 2011 to April 2012. The main emission unit of the A2O process was an oxic tank, accounting for 76.2% of CH4 emissions; the main emission unit of the SBR process was the feeding and aeration phase, accounting for 99.5% of CH4 emissions. CH4 can be produced in the anaerobic condition, such as in the primary settling tank and anaerobic tank of the A2O process. While CH4 can be consumed in anoxic denitrification or the aeration condition, such as in the anoxic tank and oxic tank of the A2O process and the feeding and aeration phase of the SBR process. The CH4 emission flux and the dissolved CH4 concentration rapidly decreased in the oxic tank of the A2O process. These metrics increased during the first half of the phase and then decreased during the latter half of the phase in the feeding and aeration phase of the SBR process. The CH4 oxidation rate ranged from 32.47% to 89.52% (mean: 67.96%) in the A2O process and from 12.65% to 88.31% (mean: 47.62%) in the SBR process. The mean CH4 emission factors were 0.182 g/ton of wastewater and 24.75 g CH4/(person·year) for the A2O process, and 0.457 g/ton of wastewater and 36.55 g CH4/(person-year) for the SBR process.