کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4471704 1315039 2013 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
پیش نمایش صفحه اول مقاله
Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production
چکیده انگلیسی


• Three representative types of waste from alimentary chains were tested.
• Several pretreatment processes and their combinations were tested.
• Hydrogen production through Anaerobic Digestion (AD) from Organic Waste (OW).
• Alkaline pretreatment is necessary for the OW to increase energy production.
• The pretreatments are able to improve the H2 production from 4 to 17-fold.

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200 atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η = 6.4, whereas the thermal basic pretreatment gave the highest value, η = 17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η = 9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η = 5.2.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Waste Management - Volume 33, Issue 11, November 2013, Pages 2225–2233
نویسندگان
, , , ,