Pyrolysis of polyethylene mixed with paper and wood: Interaction effects on tar, char and gas yields

In the present study the interactions between the main constituents of the refuse derived fuel (plastics, paper, and wood) during pyrolysis were studied. Binary mixtures of polyethylene-paper and polyethylene/sawdust have been transformed into pellets and pyrolyzed. Various mixtures with different composition were analyzed and pyrolysis products (tar, gas, and char) were collected.The mixtures of wood/PE and paper/PE have a different behavior. The wood/PE mixtures showed a much reduced interaction of the various compounds because the yields of pyrolysis products of the mixture can be predicted as linear combination of those of the pure components. On the contrary, a strong char yield increase was found at a low heating rate for paper/PE mixtures. In order to explain the results, the ability of wood and paper char to adsorb and convert the products of PE pyrolysis into was studied. Adsorption and desorption tests were performed on the char obtained by paper and wood by using n-hexadecane as a model compound for the heavy products of PE pyrolysis.

► Interactions between PE/wood and PE/paper during pyrolysis were studied.
► Interactions have not effects on tar, char and gas yields with PE/wood mixtures.
► An increase of char yield was found with PE/paper mixtures al low heating rate.
► Adsorption tests of hexadecane were performed on wood and paper char.
► Paper char was able to convert most of hexadecane in carbon.