Oil separation from wet-milled corn germ dispersions by aqueous oil extraction and aqueous enzymatic oil extraction

The many recent dry-grind plants that convert corn to ethanol are a potential source of substantial amounts of corn oil, if an economical method of separating it can be developed. Oil separation from corn germ by aqueous extraction (AE) was studied. Batches of 5–20% germ in a buffer solution were preheated in a pressure cooker, ground in a blender or colloid mill, churned in an incubator/shaker and centrifuged to separate a free oil fraction. The highest oil yields were obtained when the germ mass fraction was between 0.1 and 0.16. Addition of an enzyme solution to the ground germ suspension prior to churning, aqueous enzymatic extraction (AEE) gave an oil yield twice as high as the AE yield, carried out using similar conditions. Both types of extraction produced the most oil after a 122 °C cook followed by churning at 160 rpm and 70 °C. Oil yield increased linearly with dispersion loading, from 0.5 up to 1.0 g/cm2 based on beaker cross-section (0.09–0.12 germ mass fraction). Over a several month period the germ used for the extractions became more difficult to extract, despite storage at 4 °C.