Rheological properties of starches with different amylose/amylopectin ratios

The rheological properties of corn starches with different amylose/amylopectin ratios (80/20, 50/50, 23/77, and 0/100) were systematically studied by Haake rheometry. The starches were initially pre-compounded with water to designated moisture content levels using a twin-screw extruder. A single-screw extruder with a slit capillary die was then used to characterize the shear stress and melt viscosity characteristics of sample pellets, as a function of both moisture content (19–27%) and extrusion temperature (110–140 °C). The melts exhibited shear thinning behavior under all conditions, with the power law index (0 < n < 1) increasing with increasing temperature and moisture content in the majority of cases. The higher the amylose content, the higher is the viscosity (for example, η increases from 277 Pa s to 1254 Pa s when amylose content increases from 0% to 80% under a certain condition), which is opposite to the sequence of molecular weight; amylopectin-rich starches exhibited increased Newtonian behavior. These rheological behaviors are attributed to the higher gelatinization temperature of amylose-rich starches, and in particular the multiphase transitions that occur in these starches at higher temperatures, and the gel-ball structure of gelatinized amylopectin.