Laser-diagnostic mapping of temperature and soot statistics in a 2-m diameter turbulent pool fire

We present spatial profiles of temperature and soot-volume-fraction statistics from a sooting, 2-m base diameter turbulent pool fire, burning a 10%-toluene/90%-methanol fuel mixture. Dual-pump coherent anti-Stokes Raman scattering and laser-induced incandescence are utilized for simultaneous point measurements of temperature and soot. The research fuel-blend used here results in a lower soot loading than real transportation fuels, but allows us to apply high-fidelity laser diagnostics for spatially resolved measurements in a fully turbulent, buoyant fire of meter-scale base size. Profiles of mean and rms fluctuations are radially resolved across the fire plume, both within the hydrocarbon-rich vapor-dome region near fuel pool, and higher within the actively burning region of the fire. The spatial evolution of the soot and temperature probability density functions is discussed. Soot fluctuations display significant intermittency across the full extent of the fire plume for the research fuel blend used. Simultaneous, spatially overlapped temperature/soot measurements permit us to obtain estimates of joint statistics that are presented as spatially resolved conditional averages across the fire plume, and in terms of a joint pdf obtained by including measurements from multiple spatial locations. Within the actively burning region of the fire, soot is observed to occupy a limited temperature range between ∼1000 and 2000 K, with peak soot concentration occurring at 1600-1700 K across the full radial extent of the fire plume, despite marked changes in the local temperature pdf across the same spatial extent. A wider range of soot temperatures is observed in the fuel vapor-dome region low in the pool fire, with detectable cold soot persisting into conditionally averaged statistics. The results yield insight into soot temperature across a wide spatial extent of a fully turbulent pool fire of meaningful size, which are valuable for development of soot radiative-emission models and for validation of fire fluid-dynamics codes.