کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4768546 | 1424958 | 2017 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modified carbon nanotubes/tetraethylenepentamine for CO2 capture
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this work, a CO2 sorbent was prepared by immobilizing tetraethylenepentamine (TEPA) onto modified carbon nanotubes. Modification of carbon nanotubes (CNTs) using a KOH reagent was done to increase the surface area and pore volume of the CNTs. The prepared sorbents were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) analyses. At the optimal TEPA loading of 75 wt% on modified CNTs (MCNTs), the CO2 sorption capacity reached 5 mmol CO2/g-sorbent for 10 vol% CO2 in N2 along with 1 vol% H2O at 60 °C. Kinetic and thermodynamic adsorption studies found activation energies for CO2 adsorption and desorption of MCNTs/TEPA being16.2 kJ/mol and 39.9 kJ/mol, respectively. The low activation energy for CO2 desorption using MCNTs/TEPA corresponds with a high CO2 desorption rate, resulting in a low CO2 capture cost. Therefore, the MCNTs/TEPA sorbent has potential for application to CO2 capture from gas mixtures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 206, 15 October 2017, Pages 10-18
Journal: Fuel - Volume 206, 15 October 2017, Pages 10-18
نویسندگان
Maryam Irani, Andrew T. Jacobson, Khaled A.M. Gasem, Maohong Fan,