Using a constructive pavement texture index for skid resistance screening

Skid resistance measurement is one of the major measurements used to assess road safety. Typical devices used for measuring skid resistance include single point checking type and continuous measurements type. However, conducting periodic full roadway network skid resistance survey can be a relatively time consuming and difficult task because of the limited water carrying capacity used by all kinds of devices, including the continuous types. On the contrary, measurement of pavement surface texture can be conducted easily and continuously by most profilers. This research investigates the relation between pavement skid resistance and surface texture. The focus is on the development of a texture index that can serve as a screening indicator to filter out the high-risk pavement sections for further skid resistance measurement. Two measuring devices, GripTester (GT) and National Taiwan University laser profiler (NTU Profiler), were used to collect data on pavement skid resistance and texture in a network of 555 sections, respectively. The pavement texture index of the mean difference of elevation (MDE) is calculated at a 1 mm profile interval, which is a very promising indicator to represent pavement skid resistance. Through a sensitivity study, the MDE threshold of 0.15 mm is observed to provide a relatively reasonable screening function that filters out 29.01% of the entire surveyed network for further skid resistance inspection. It averted more than 70% skid resistance measurement capacity of the entire network. The accuracy of correct judgment by the selected threshold is about 80%, only 3.78% of roadway sections considered for further inspection of the recommended list are not included.