کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4922369 1430183 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Hyperbolic hardening model for quasibrittle materials
ترجمه فارسی عنوان
مدل تقویت هیپربولیک برای مواد شبه شکر
کلمات کلیدی
شرایط تولید، قانون اساسی، جامد پلاستیکی الاستیک مواد اصطکاک انعطاف پذیر، زمین شناسی
ترجمه چکیده
در این مطالعه مدل سخت کننده الاستوپلاستی برای مواد شبه شکسته ارائه شده است. سطح عملکرد نشان می دهد مریدانی هیپربولیک، در حالی که شکل آن بر روی یک هواپیما انحرافی با یک تابع بیضوی توصیف می شود. مکانیزم سخت افزاری پیشنهادی توسط شیب غیرمعمول از مریدین های هذلولی و به این ترتیب با اصطکاک بسیج مواد کنترل می شود. سطح عملکرد در مرحله اول سخت شدن و در مرحله قبل از رسیدن به قدرت پیک باز می شود. در هواپیما انحرافی، سخت شدن تغییرات تولیدی یکنواخت در اندازه و شکل سطح عملکرد است. پتانسیل پلاستیکی پیشنهاد شده با عملکرد تابع از طریق تغییر ساده ی بخش حجمی آن مرتبط است. این مدل با یک قانون سخت شدن مجهز است که یک تابع بیضوی یکنواختی از پارامتر سخت شدن است. دومی در شکل نرخ خود داده می شود و وابسته به فشار است. یک قاعده انعطاف پذیری، این وابستگی فشار را کنترل می کند و در رفتار تنش و رفتار انعطاف پذیر در فشرده سازی محرمانگی بالا منجر به رفتار شکننده می شود. تمام پارامترها تفسیر فیزیکی دارند و به طور مستقیم با خواص مکانیکی قابل اندازه گیری مواد در آزمایشگاه مرتبط هستند. اکثر آنها را می توان از یک تست فشرده سازی یکسانی شناسایی کرد. پیش بینی مدل در مقایسه با مجموعه داده های تجربی مقایسه شده است و نشان می دهد که توافق بسیار خوبی را نشان می دهد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In this study an elastoplastic hardening model for quasibrittle materials is presented. The yield surface exhibits hyperbolic meridians while its shape on the deviatoric plane is described by an elliptic function. The proposed hardening mechanism is controlled by the slope of the asymptotes of the hyperbolic meridians and thus by the mobilized friction of the material. The yield surface is capped during the first stages of hardening and opens up before reaching the peak strength. On the deviatoric plane the hardening is non-uniform producing changes in both the size and the shape of the yield surface. The proposed plastic potential is related with the yield function through a simple modification of its volumetric part. The model is equipped with a hardening rule that is a monotonically increasing elliptic function of the hardening parameter. The latter is given in its rate form and it is pressure dependent. A proposed ductility rule controls this pressure dependency and leads to brittle behavior in tension and ductile behavior at high confinement compression. All the parameters have physical interpretation and are directly related with measurable mechanical properties of the material in the lab. Most of them could be identified from a uniaxial compression test. The predictions of the model are compared against experimental datasets and it is shown that exhibit very good agreement.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Solids and Structures - Volume 120, 1 August 2017, Pages 257-267
نویسندگان
, ,