کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4994275 1458034 2017 14 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Dielectric liquid pumping flow in optimally operated micro heat pipes
ترجمه فارسی عنوان
جریان پمپاژ دی الکتریک در لوله های میکرو گرمایش بهینه سازی شده
کلمات کلیدی
اثربخشی گردش پمپاژ مایع دی الکتریک، ظرفیت انتقال حرارت، لوله گرم میکرو،
ترجمه چکیده
لوله میکرو گرمی یک دستگاه انتقال حرارت دو مرحلهای با مویرگی میکروارگانیسم است که عملکرد حرارتی آن به واسطه استحکام تبخیر و تأثیر گردش خون از خازن تا اواپراتور کنترل می شود. با استفاده از یک مدل ریاضی بر اساس قوانین حفاظت، این مطالعه نشان می دهد استفاده از جریان دی الکتریک پمپاژ در افزایش اثرات گردش خون از میعانات گازی و از این رو عملکرد حرارتی لوله های میکرو گرما. از طریق استفاده از یک میدان الکتریکی غیر یکنواخت، گرادیان فشار ماکسول موجب هدایت تراکم جریان به سمت اواپراتور می شود. دو پیکربندی پمپ دی الکتریک با هم مقایسه می شوند و لوله های میکرو گرمایش با استفاده از الکترودهای مسطح بهتر از الکترودهای پین عمل می کنند. افزایش عملکرد پمپ های دی الکتریک مختلف که در آن مقدار کل انرژی الکتریکی پمپ حفظ می شود، تجزیه و تحلیل می شود. پمپ دی الکتریک بهترین زمانی است که کل طول لوله گرم میکرو را پوشش می دهد. در مقایسه با مورد بدون جریان پمپاژ دی الکتریک، افزایش قابل توجهی در ظرفیت انتقال حرارت می تواند بدست آید که حداکثر افزایش بیش از 220 درصد باشد. حتی با افزایش عملکرد قابل توجهی، استفاده از پمپ دی الکتریک یک قطر دمایی دیافراگم جامد به اندازه کافی کوچک از یک لوله میکرو گرما را به ارمغان می آورد که به طور معمول ویژگی دستگاه انتقال حرارت را تغییر می دهد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Micro heat pipe is a micro-scale capillary-driven two-phase heat transfer device of which thermal performance is governed by the strength of evaporation and the circulation effectiveness of condensate from the condenser to the evaporator. By employing a mathematical model based on the conservation laws, this study demonstrates the application of dielectric pumping flow in enhancing the circulation effectiveness of condensate and hence the thermal performance of micro heat pipes. Through the application of a non-uniform electric field, the Maxwell pressure gradient is induced to drive the condensate flowing towards the evaporator. Two different dielectric pump configurations are compared and the micro heat pipe using planar electrodes is found performing better than that with the pin electrodes. The performance enhancement of different dielectric pump lengths where the total amount of electrical energy of the pump is conserved is analysed. The dielectric pump performs the best when it covers the entire length of micro heat pipe. Compared to the case without dielectric liquid pumping flow, significant enhancement in the heat transport capacity can be obtained where the maximum enhancement exceeds 220%. Even with a significant performance enhancement, the use of dielectric pump renders a sufficiently small solid wall temperature drop of a micro heat pipe, justifying the typical characteristic of a phase-change heat transfer device.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 108, Part A, May 2017, Pages 257-270
نویسندگان
, ,