کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4994372 | 1458033 | 2017 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Heat transfer performance in a rotating two-inlet cooling wedge-shaped channel with lateral inflow holes
ترجمه فارسی عنوان
عملکرد انتقال حرارت در یک کانال دو طرفه خنک کننده دو طرفه با چاه های ورودی جانبی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
خنک کننده دو ورودی کانال گوه شکل چرخش انتقال حرارت، نسبت جریان جرمی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The results show that single lateral coolant inflow significantly improves heat transfer of channel top-half at stationary, but brings positive enhanced effect on bottom-half regions in rotating cases. When MR increases over 0.5, the lateral coolant begins to present positive effect on channel bottom-half. A critical MR of 0.3 is observed at top-half regions for the least stream-wise heat transfer difference. For both heat transfer enhancement and uniformity consideration, the MRs from 0.3 to 0.7 are better considered for two-inlet cooling schemes, while the optimal condition is around 0.45. Two-inlet cooling scheme monotonously improves rotational surface averaged heat transfer as MR increases. Due to the rotational effects and MR effects on high-radius regions are very limited, the trends of surface averaged values are mainly determined by low-radius region.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 108, Part B, May 2017, Pages 1418-1427
Journal: International Journal of Heat and Mass Transfer - Volume 108, Part B, May 2017, Pages 1418-1427
نویسندگان
Yang Li, Hongwu Deng, Zhi Tao, Guoqiang Xu, Shuqing Tian,